Travertine Sealer Booroobin - Brisbane

• Prevents stains
• Guards against discoloration
• Enhances protection for travertine
• Improves surface appearance
• Simplifies regular maintenance

In impregnating sealer the "active component" consists of either a natural or synthetic resin.

This resin is mixed into a liquid solution, known as a carrier, which can be water-based.

• Penetrates into the travertine substrate in Booroobin and bonds its protective layer to the walls within the micro-pore structure, enabling complete vapor transmission through the stone.
• Does not alter the color or sheen of the travertine.
• Does not necessitate reapplication after each cleaning.
• Since the sealer does not sit on the surface in Booroobin, it won't scratch or scuff. Without a surface coating to wear off, the sealer doesn't need as frequent reapplication as topical sealers.
• Does not result in surfaces becoming slippery when wet.

With numerous sealers available in the market today, choosing the right one for your tile can be bewildering. Which one will be effective, which won't, which sealer suits your specific needs, and how they vary?

Impregnating sealers are formulated with a liquid carrier (either water or solvent based) that penetrates into the small pinholes and open fissures just below the surface of the travertine. Once absorbed, the carrier evaporates, leaving the sealer behind to chemically react with the surface pores, forming a breathable protective barrier.

An impregnating sealer safeguards your travertine surface and grout from absorbing stains, making cleaning and maintenance significantly easier. Australia's selection of impregnating water-based sealers can endure for up to 15 years.

Penetrating impregnating transparent sealers permeate the pores of your travertine, and once cured, they do not change the appearance of the tile or stone.

Incorporating fluoro-chemical technology, GOLD represents the pinnacle of travertine sealing technology in Booroobin, offering unparalleled long-term protection against water and oil-based stains. Its micro-molecular formula chemically interacts with the pore structure of your travertine to establish a bond stronger than any other conventional sealer.

Sealing prevents moisture carrying stains from being absorbed into your travertine in Booroobin.

Solvent-based sealers are typically only necessary in extreme cases and are generally not recommended in Booroobin. Water-based sealers leverage modern technologies such as nanotechnology and fluoro-polymer technology, making many older solvent-based products outdated.

Solvent-based products frequently contain harmful fumes that can pose health risks in Booroobin, requiring evacuation of the property for up to 48 hours during application. Additionally, solvents can cause damage to property, including skirting boards, doors, paint, and adjacent areas.

• For optimal protection against oil and water-based stains, as well as to preserve the appearance and slip resistance of your travertine in Booroobin, it is advisable to seal it with a premium, invisible, fully breathable impregnating sealer. This helps prevent harmful moisture from being trapped within the stone.

Impregnating sealers are typically suitable for both interior and exterior applications in Booroobin, including wet areas like kitchens, bathrooms, laundries, patios, and around swimming pools.

• A penetrating colour enhancing sealer is formulated to enrich and enhance the natural appearance of travertine surfaces.
• Penetrating Colour Enhancer is an ideal sealer for travertine in Booroobin for two primary reasons. Firstly, it is an impregnating sealer, meaning it penetrates deeply into the pores of travertine, offering long-lasting robust protection against ingrained dirt. Secondly, it incorporates color-intensifying properties that enhance the natural hues in the travertine.

Pre-Sealing Preparation for Travertine in Booroobin:

1- Prior to sealing, ensure that the surface is clean and in the desired condition in Booroobin, as it may be difficult to remove stains post-sealing without stripping away the sealer. Avoid using acidic cleaners on travertine as they can cause damage.
2- Travertine in Booroobin should not have any other coatings such as wax or topical sealers before sealing, so any existing coating must be removed beforehand.
The floor must be completely dry in Booroobin before applying most sealers.

The number of coats needed will vary depending on the porosity of the travertine in Booroobin. Additional coats may be necessary. Once sealed, the tile will resist all staining, and as long as any stains are promptly wiped away, there will be no evidence of marks on the surface of the stone.

Impregnating penetrating sealants penetrate into the travertine substrate in Booroobin, saturating the microscopic pinholes and open fissures that constitute its natural texture. A clear impregnating sealer won't alter the appearance or texture of your sealed travertine, won't impact the stone's ability to release vapor, and will have a longer lifespan compared to film-forming sealers.

Advantages include:

• Extended lifespan as the protection resides within the substrate, rather than just on the surface.
• Unaffected by UV light.
• Permits the stone to "breathe," allowing retained moisture to escape.
• Surface remains non-slippery.
• Enhances the life expectancy of travertine in Booroobin.

Unsealed travertine surfaces in Booroobin are notably porous and prone to enduring staining from common spills. Sealing is essential to safeguard your travertine against undesired staining and deterioration.

If you possess a travertine tiled floor in Booroobin, you're aware of its rapid absorption of liquids, making it susceptible to potential liquid-borne stains.

Topical sealers in Booroobin create a protective glossy sheen on the surface of stone and masonry, while penetrating sealers infiltrate the surface of travertine and safeguard the walls of each individual pore within its structure.

Drawbacks of topical sealers in Booroobin may include:

• Need for frequent reapplication
• Requirement for complete removal before reapplication
• Hindrance of stone breathing, leading to trapped moisture
• Formation of a shiny surface film prone to scratching or scuffing
• Alteration of the color of travertine

The main purpose of a stone sealer in Booroobin is to offer stain resistance to porous travertine stone.

Red wine, oil, and grease, especially, can cause damage to travertine in Booroobin that may require heavy resurfacing machinery for removal. While sealing travertine won't entirely prevent liquids from being absorbed, it will provide you with time to wipe spills away before permanent damage occurs.

Cleaning and maintaining unsealed travertine flooring in Booroobin can be more challenging as surface contaminants will rapidly absorb into the porous travertine structure, making them difficult to remove.

It is highly recommended to apply a deep-penetrating impregnating sealer to travertine floors in Booroobin after installation to ensure long-lasting protection and stain resistance.

The finest penetrating sealer currently available is manufactured in Australia. They produce advanced, non-toxic sealers that are simple to apply using a brush, roller, or sprayer and dry within a few hours. These deep-penetrating travertine sealers are offered in a dry, invisible finish or a slightly wet, color-enhancing effect, with a lifespan of 10 to up to 15 years.

• Select a high-quality, durable deep penetrating, impregnating sealer.
• Thoroughly clean your travertine before application to prevent dust and debris from being trapped once sealed.
• Follow proper application procedures and apply the appropriate number of coats.
• Keep in mind that with stone sealers, the quality typically corresponds to the price.

Travertine stone varies in hardness and is inherently porous. When a small amount of water is applied to an unsealed travertine surface in Booroobin, it will be absorbed within seconds. Additionally, the porosity of travertine is influenced by its finish. For instance, highly polished travertine is less porous compared to travertine with a honed (matte) finish.

Incorporating fluoro-chemical technology, GOLD represents the most advanced technology available in Booroobin, delivering unparalleled long-term protection against water and oil-based stains for travertine. Its micro-molecular formula chemically interacts with the stone surface to form a bond stronger than any other conventional sealer.

Simplifies maintenance for your travertine in Booroobin!

Offers robust defense against stains, exceptional oil and water repellency, maintains the natural surface appearance, non-film forming, breathable, and simple to clean and maintain, ensuring the preservation of your travertine's beauty.

Select a reputable company with specialized equipment and expertise to properly seal and maintain your travertine after installation.

It's crucial to maintain cleanliness of your sealed travertine, promptly wiping up spills and cleaning periodically.

Professional cleaning not only eliminates surface dirt but also extracts deeply embedded dirt within the pores of travertine.

Reach out to a professional stone floor maintenance company in Booroobin equipped with the necessary tools and expertise to ensure your valuable surfaces meet your expectations.

Tile Cleaners Australia and StoneMaster are part of a network of independent Accredited Applicators extensively trained in the proper application of travertine care products. They offer comprehensive services, including thorough cleaning of the travertine area, product application, and post-treatment care.

• Tile Cleaners Booroobin is Booroobin' specializes in tile and grout cleaning, sealing, stripping, resealing, regrouting, grout color sealing, and minor tile repairs, making them Australia's leading tile care provider.
• StoneMaster adopts a diagnostic approach to each unique situation, conducting a full analysis and selecting the best restoration method, followed by maintenance procedures to ensure outstanding results.

It's crucial to thoroughly clean your travertine in Booroobin before sealing to prevent sealing in old stains or embedded dust and debris, which would require stripping and resealing.