- travertine Sealer Artarmon
- Penetrating travertine Sealer Artarmon
- Outdoor travertine Sealer Artarmon
- Non Slip Sealer for travertine Artarmon
- Long Lasting travertine Sealer Artarmon
- Impregnating travertine Sealer Artarmon
- Breathable travertine Sealer Artarmon
- Best travertine Sealer Artarmon
- Sealing travertine Pavers Artarmon
- Sealing travertine around Pool Artarmon
- Sealing travertine Kitchens Artarmon
- Sealing travertine Bathrooms Artarmon
- Sealing travertine Showers Artarmon
- Sealing travertine Benchtops Artarmon
- Protecting against Acid Attack
- Protecting against Salt Attack
- Protecting against Efflorescence
- Why travertine?
- What is travertine?
- What is Efflorescence?
- Maintenance & Care Artarmon
- travertine Stains Removal Artarmon
- Efflorescence Removal Artarmon
- travertine Available Finishes Artarmon
Removing Stains from travertine Artarmon - Sydney
As always, prevention is better than finding a cure. If you have sealed your travertine, you should be able to easily wipe away any potential stain, provided it hasn't been left too long.
It is crucial in Artarmon to NEVER use anything acidic, such as vinegar or citrus, as it can etch or corrode your travertine.
If you encounter a potential stain, you can try the following solutions for travertine:
Utilize a commercial poultice product for travertine in Artarmon.
A poultice typically consists of a blend of ground chalk (whiting) and hydrogen peroxide, which can be obtained from hardware stores in Artarmon. Some variations may utilize a different chemical instead of hydrogen peroxide. Follow the instructions provided with the product as a general guide when applying it to travertine in Artarmon.
- Wet the poultice with distilled water.
- Apply the poultice to the stain or stained area.
- Leave it in situ for 48 hours to enable drying and absorption into the travertine.
- Rinse off the poultice. The stain should have disappeared.
- Reseal the area with a penetrating sealer
Since travertine is calcium-based, acidic substances like vinegar and lemon juice should never be used.
When using any cleaning product on travertine in Artarmon, ensure it is pH neutral.
Due to the calcium content in travertine and its porous nature, using acidic or harsh cleaners may scratch and damage the surface.
How to Clean Travertine Floors:
- Mix warm water and a pH neutral floor cleaner in a bucket
- Add 1 cup of cornflour to the mixture.
- Stir vigorously.
- Use this mixture to mop the floor.
The cornflour aids in removing marks and stains from travertine in Artarmon as it helps draw out substances from the porous stone.
If the above techniques fail to achieve the desired results, consider contacting a professional cleaning company in Artarmon equipped with the appropriate equipment and solutions for travertine.
Tile Cleaners Artarmon is Artarmon's specializes in tile and grout cleaning, sealing, stripping, resealing, regrouting, grout color sealing, and minor tile repairs, making them Australia's leading tile care provider.
Please be aware that any information provided is given in good faith and is believed to be appropriate and reliable. However, as conditions may vary widely and are beyond our control, this information is provided without liability or responsibility on our part. It is the recipient's responsibility to determine if the information provided is suitable for their specific situation. If there is any doubt, any process should be tested in an inconspicuous area before general application.