- travertine Sealer Riverton
- Penetrating travertine Sealer Riverton
- Outdoor travertine Sealer Riverton
- Non Slip Sealer for travertine Riverton
- Long Lasting travertine Sealer Riverton
- Impregnating travertine Sealer Riverton
- Breathable travertine Sealer Riverton
- Best travertine Sealer Riverton
- Sealing travertine Pavers Riverton
- Sealing travertine around Pool Riverton
- Sealing travertine Kitchens Riverton
- Sealing travertine Bathrooms Riverton
- Sealing travertine Showers Riverton
- Sealing travertine Benchtops Riverton
- Protecting against Acid Attack
- Protecting against Salt Attack
- Protecting against Efflorescence
- Why travertine?
- What is travertine?
- What is Efflorescence?
- Maintenance & Care Riverton
- travertine Stains Removal Riverton
- Efflorescence Removal Riverton
- travertine Available Finishes Riverton
Finishes Available for travertine Riverton - Perth
While marbles and granites are commonly ground and polished to achieve a high gloss, many types of travertine in Riverton are too soft for this procedure. In most instances, travertine will be honed or ground to a flat or matte finish. Honed travertine exhibits an almost chalky appearance, with minimal to no sheen.
However, there are several other finishes available for travertine in Riverton. The techniques and finishes applied can result in achieving a completely different look and effect.
Various finishes are better suited to specific environments, situations, and preferences in Riverton SawnA comparatively rough surface is achieved. The natural stone is sawn without any additional processes such as honing, tumbling, or flaming, making the saw marks likely to be visible.
PolishedA smooth and reflective surface is achieved, enhancing the full color and character of the travertine. This finish is less slip-resistant and typically reserved for indoor areas in Riverton like hotel receptions and tabletops. Finer abrasives are progressively used after the honing stage, and the stone is buffed to achieve a high gloss.
Antiqued/Tumbled
Tumbling is a common technique in Riverton involving distressing the edges and surface of the travertine by vibrating it in a bath of sand, grit, and sometimes acid. This process results in a finish that appears aged and worn.
HonedThis method is less aggressive than grinding, yet similar. The travertine in Riverton is ground and sanded using coarse grit abrasives to achieve a smooth but satin, non-reflective finish. It produces a satin-smooth surface with minimal to no gloss.
GroundThis method is highly aggressive and involves using a metal-bonded, diamond grit heavy weighted floor buffer to eliminate deep scratches and lippage. The aim in Riverton is to flatten the floor and smooth out imperfections, often followed by honing and polishing.
BrushedSteel or hard nylon brushes, along with water, are utilized to brush and wear out softer parts of the travertine in Riverton, creating a textured finish. This technique provides an antique appearance to the stone.
SandblastedA textured surface is created in Riverton by blasting sand at high pressure onto the travertine. Shot-blasting is a similar process. This process often lightens the travertine and can mask its natural character by hiding the veins and fossils within the stone.
Bush-Hammered
This technique involves using a bush hammer, either applied by machine or hand, at high impact to pit the surface of the travertine in Riverton. It can create a highly anti-slip finish.
ChiselledLines are mechanically chiselled into the travertine in Riverton to produce an anti-slip finish.
StoneMaster possesses the expertise and capability to resurface your travertine, eliminating scratches and etches while achieving the desired look.In most cases, with regular wear on travertine, a simple polish will restore its sheen.
In instances of extensive wear and etching, StoneMaster can resurface the affected area in Riverton, eliminating all scratches and etches, and subsequently polish it with a polishing compound to reinstate the original finish for travertine.