- travertine Sealer Garran
- Penetrating travertine Sealer Garran
- Outdoor travertine Sealer Garran
- Non Slip Sealer for travertine Garran
- Long Lasting travertine Sealer Garran
- Impregnating travertine Sealer Garran
- Breathable travertine Sealer Garran
- Best travertine Sealer Garran
- Sealing travertine Pavers Garran
- Sealing travertine around Pool Garran
- Sealing travertine Kitchens Garran
- Sealing travertine Bathrooms Garran
- Sealing travertine Showers Garran
- Sealing travertine Benchtops Garran
- Protecting against Acid Attack
- Protecting against Salt Attack
- Protecting against Efflorescence
- Why travertine?
- What is travertine?
- What is Efflorescence?
- Maintenance & Care Garran
- travertine Stains Removal Garran
- Efflorescence Removal Garran
- travertine Available Finishes Garran
Finishes Available for travertine Garran - Canberra
While marbles and granites are commonly ground and polished to achieve a high gloss, many types of travertine in Garran are too soft for this procedure. In most instances, travertine will be honed or ground to a flat or matte finish. Honed travertine exhibits an almost chalky appearance, with minimal to no sheen.
However, there are several other finishes available for travertine in Garran. The techniques and finishes applied can result in achieving a completely different look and effect.
Various finishes are better suited to specific environments, situations, and preferences in Garran SawnA comparatively rough surface is achieved. The natural stone is sawn without any additional processes such as honing, tumbling, or flaming, making the saw marks likely to be visible.
PolishedA smooth and reflective surface is achieved, enhancing the full color and character of the travertine. This finish is less slip-resistant and typically reserved for indoor areas in Garran like hotel receptions and tabletops. Finer abrasives are progressively used after the honing stage, and the stone is buffed to achieve a high gloss.
Antiqued/Tumbled
Tumbling is a common technique in Garran involving distressing the edges and surface of the travertine by vibrating it in a bath of sand, grit, and sometimes acid. This process results in a finish that appears aged and worn.
HonedThis method is less aggressive than grinding, yet similar. The travertine in Garran is ground and sanded using coarse grit abrasives to achieve a smooth but satin, non-reflective finish. It produces a satin-smooth surface with minimal to no gloss.
GroundThis method is highly aggressive and involves using a metal-bonded, diamond grit heavy weighted floor buffer to eliminate deep scratches and lippage. The aim in Garran is to flatten the floor and smooth out imperfections, often followed by honing and polishing.
BrushedSteel or hard nylon brushes, along with water, are utilized to brush and wear out softer parts of the travertine in Garran, creating a textured finish. This technique provides an antique appearance to the stone.
SandblastedA textured surface is created in Garran by blasting sand at high pressure onto the travertine. Shot-blasting is a similar process. This process often lightens the travertine and can mask its natural character by hiding the veins and fossils within the stone.
Bush-Hammered
This technique involves using a bush hammer, either applied by machine or hand, at high impact to pit the surface of the travertine in Garran. It can create a highly anti-slip finish.
ChiselledLines are mechanically chiselled into the travertine in Garran to produce an anti-slip finish.
StoneMaster possesses the expertise and capability to resurface your travertine, eliminating scratches and etches while achieving the desired look.In most cases, with regular wear on travertine, a simple polish will restore its sheen.
In instances of extensive wear and etching, StoneMaster can resurface the affected area in Garran, eliminating all scratches and etches, and subsequently polish it with a polishing compound to reinstate the original finish for travertine.