THANK YOU FOR YOUR ENQUIRY

Dear
Thank you for your enquiry with StoneMaster, Australia's leading stone care specialist.
To help us best serve your enquiry, you can upload any photos that highlight areas of concern.

We're happy to answer any questions you may have, and will get back to you as soon as we can.
In the meantime, please feel free to contact us on 0478 085 801 or send us an email to [email protected]

Quick Links
outdoor travertine pavers Grey travertine flooring

QUICK LINKS

Finishes Available for travertine Albany

While marbles and granites are commonly ground and polished to achieve a high gloss, many types of travertine in Albany are too soft for this procedure. In most instances, travertine will be honed or ground to a flat or matte finish. Honed travertine exhibits an almost chalky appearance, with minimal to no sheen.

However, there are several other finishes available for travertine in Albany. The techniques and finishes applied can result in achieving a completely different look and effect.

Various finishes are better suited to specific environments, situations, and preferences in Albany Sawn

A comparatively rough surface is achieved. The natural stone is sawn without any additional processes such as honing, tumbling, or flaming, making the saw marks likely to be visible.

Polished

A smooth and reflective surface is achieved, enhancing the full color and character of the travertine. This finish is less slip-resistant and typically reserved for indoor areas in Albany like hotel receptions and tabletops. Finer abrasives are progressively used after the honing stage, and the stone is buffed to achieve a high gloss.

 Albany garage travertine floor polishing and sealing

Antiqued/Tumbled

Tumbling is a common technique in Albany involving distressing the edges and surface of the travertine by vibrating it in a bath of sand, grit, and sometimes acid. This process results in a finish that appears aged and worn.

Honed

This method is less aggressive than grinding, yet similar. The travertine in Albany is ground and sanded using coarse grit abrasives to achieve a smooth but satin, non-reflective finish. It produces a satin-smooth surface with minimal to no gloss.

Ground

This method is highly aggressive and involves using a metal-bonded, diamond grit heavy weighted floor buffer to eliminate deep scratches and lippage. The aim in Albany is to flatten the floor and smooth out imperfections, often followed by honing and polishing.

Brushed

Steel or hard nylon brushes, along with water, are utilized to brush and wear out softer parts of the travertine in Albany, creating a textured finish. This technique provides an antique appearance to the stone.

Sandblasted

A textured surface is created in Albany by blasting sand at high pressure onto the travertine. Shot-blasting is a similar process. This process often lightens the travertine and can mask its natural character by hiding the veins and fossils within the stone.

 Albany luxury seal travertine tiles
Bush-Hammered

This technique involves using a bush hammer, either applied by machine or hand, at high impact to pit the surface of the travertine in Albany. It can create a highly anti-slip finish.

Chiselled

Lines are mechanically chiselled into the travertine in Albany to produce an anti-slip finish.

StoneMaster possesses the expertise and capability to resurface your travertine, eliminating scratches and etches while achieving the desired look.

In most cases, with regular wear on travertine, a simple polish will restore its sheen.

In instances of extensive wear and etching, StoneMaster can resurface the affected area in Albany, eliminating all scratches and etches, and subsequently polish it with a polishing compound to reinstate the original finish for travertine.

 Albany grey travertine after sealing

Please wait...