QUICK LINKS

• 
• Slate Sealer Royston Park
• Penetrating Slate Sealer Royston Park
• Outdoor Slate Sealer Royston Park
• Non Slip Sealer for Slate Royston Park
• Long Lasting Slate Sealer Royston Park
• Impregnating Slate Sealer Royston Park
• 
• Limestone Sealer Royston Park
• Penetrating Limestone Sealer Royston Park
• Outdoor Limestone Sealer Royston Park
• Protect Limestone against Acid Attack
• Protect Limestone against Salt Attack
• 
• Marble Sealer Royston Park
• Penetrating Marble Sealer Royston Park
• Outdoor Marble Seale Royston Park
• Protect Marble against Acid Attack
• Protect Marble against Salt Attack

1. Home >
2. Finishes Available for Travertine >
3. Adelaide >
4. Royston Park

Finishes Available for travertine Royston Park - Adelaide

While marbles and granites are commonly ground and polished to achieve a high gloss, many types of travertine in Royston Park are too soft for this procedure. In most instances, travertine will be honed or ground to a flat or matte finish. Honed travertine exhibits an almost chalky appearance, with minimal to no sheen.

However, there are several other finishes available for travertine in Royston Park. The techniques and finishes applied can result in achieving a completely different look and effect.

A comparatively rough surface is achieved. The natural stone is sawn without any additional processes such as honing, tumbling, or flaming, making the saw marks likely to be visible.

A smooth and reflective surface is achieved, enhancing the full color and character of the travertine. This finish is less slip-resistant and typically reserved for indoor areas in Royston Park like hotel receptions and tabletops. Finer abrasives are progressively used after the honing stage, and the stone is buffed to achieve a high gloss.

Antiqued/Tumbled

Tumbling is a common technique in Royston Park involving distressing the edges and surface of the travertine by vibrating it in a bath of sand, grit, and sometimes acid. This process results in a finish that appears aged and worn.

This method is less aggressive than grinding, yet similar. The travertine in Royston Park is ground and sanded using coarse grit abrasives to achieve a smooth but satin, non-reflective finish. It produces a satin-smooth surface with minimal to no gloss.

This method is highly aggressive and involves using a metal-bonded, diamond grit heavy weighted floor buffer to eliminate deep scratches and lippage. The aim in Royston Park is to flatten the floor and smooth out imperfections, often followed by honing and polishing.

Steel or hard nylon brushes, along with water, are utilized to brush and wear out softer parts of the travertine in Royston Park, creating a textured finish. This technique provides an antique appearance to the stone.

A textured surface is created in Royston Park by blasting sand at high pressure onto the travertine. Shot-blasting is a similar process. This process often lightens the travertine and can mask its natural character by hiding the veins and fossils within the stone.

This technique involves using a bush hammer, either applied by machine or hand, at high impact to pit the surface of the travertine in Royston Park. It can create a highly anti-slip finish.

Lines are mechanically chiselled into the travertine in Royston Park to produce an anti-slip finish.

In most cases, with regular wear on travertine, a simple polish will restore its sheen.

In instances of extensive wear and etching, StoneMaster can resurface the affected area in Royston Park, eliminating all scratches and etches, and subsequently polish it with a polishing compound to reinstate the original finish for travertine.